спаял дэбаг кабель из data samsung c100, терминал работает, но не могу залить прошивку, вообще никакую вот что пишет:
- Код: выделить все
Installed DRAM Size : 128M
Press any key to execute Monitor Program within 1 sec...
<CPU:360Mhz RAM:166Mhz SysClk:120Mhz DDR2>
----------------------------------------------------------------
START-UP MODE : Monitor Program
Boot into pROBE+ like stand-alone mode
[Type 'help' to see command info.]
Version : B1.Enc2 11-04-2010 (Zinnia 4ini NoNW) merge
----------------------------------------------------------------
Do you want to download from external port?[N] : n
pROBE+> fl
==> Now program restarted on the RAM to program flash ROM(0x40040000)
jump to 0x40040000
===============================
Start flash_writer
===============================
STM_M29W320EB70N6_4Mbytes x1 (16bit)
[Base 0x00000000: MFG 0x00000020: ID(0x00002257:0x00000000:0x00000001)]
Unknown MFG(00009090)->default settingUnknown device(00009090)
----------- Display Dcache Status ------------
Control register = 0x000510F8
Icahe : ON
Dcahe : OFF
MMU : OFF
Download Image from PC
{
Ready to download from Parallel/Usb/Serial (0x42F00000)<FS><HS><FS><HS>
Download destination Address : 0x42F00000
Image includes PJL(0000001B) -> Waste 80 bytes
[[4194328 Bytes received]] - Complete Downloading
} /* Download End */
FlashCheckSum
{
check sum start address : 0x42F00018, count : 0x00400000
check sum : 0x0000A5A5
} /* Checksum End
Found new kernel(0x42F60018)!!!!
ul_current_version = 0xFFFFFFEF
Прошу вашей помощи